Epoxy garage coating

Use epoxy to floors are increasingly popular. This is due to cheaper prices obtained and the material to be coated to be strong and durable. The use of epoxy is the most widely used in homes is the garage.
If you are interested to do his own work there are some things you should consider as this also fails for some floors.

Application of epoxy on the concrete floor is very ideal. But before applying the epoxy on the floor you should recognize the first floor you will seal with epoxy. Many floors have hydrostatic too much pressure causing water to move from under the slab so that collects on the surface which will result in breaking the bond between concrete and epoxy coating. If you keep a damp floors while outside dry for a long time so if you want to coat with epoxy you will definitely fail.
To overcome this obstacle we recommend you use salt or efflorescence that will provides help solving problems.

Another mistake that caused the failure is the preparation for coating. Most likely at that time the surface is not correct or the floor is not really clean. Any stains on the floor whether it is oil, fat etc. will prevent adequate bonding among the epoxy with concrete like the peeling. The way to overcome this is to use a sealer. After completion of this sealer should also be removed after the material to be coated will be used. Elimination of this sealer should be done with caution because it can cause the pores of bare concrete.

Get to know your floor before you want to coat with epoxy. You should be able to decide whether your floor is to overlay it. If your floor constantly wet you would better forget it.
Make sure your time to cleaning it right, because this is an absolute requirement to be met.
Although there is a sealer that will help is just a coat for the coating. One of the best sealer to use is water-based acrylic sealer that is ideal to use indoors.
Although there is the possibility of failure in the epoxy to the floor, you will be successful if done correctly.